USB logic analyzer microcontroller suitable for ARM FPGA debugging sharp tool 24M sampling 8 channels

Logic analyzer USB Saleae 24M 8CH with buffer chip supports 1.1.15 new software
Support SALEAE new version 1.1.15 software, support WIN7 (32&64), 2K, XP, LINUX!
Software download address: http://www.saleae.com/downloads/
The new batch of SALEAE 24M 8CH logic analyzers has arrived. The USB cable uses a high-quality USB 2.0 high speed compatible data cable with a shielded woven mesh used in portable hard drives. Extraordinary low-cost data cables.
The Saleae 24M 8CH logic analyzer provides designers with excellent tools with high cost-effectiveness, only earning popularity. Our store has maintained this discounted price unchanged until the seller's credit is four diamonds.
If you are a student majoring in electronics or automation, do you find the dull UART, SPI, I2C, infrared and other waveforms in books abstract and incomprehensible. On paper, one will eventually feel empty, and one must take action to know this matter. I suggest you conduct a hands-on experiment and use this logic analyzer to grasp the waveform, which will make it easier to deepen emotional and rational understanding, and thus deepen understanding and memory.
If you are an engineer or enthusiast, have you ever designed or debugged protocols such as UART, SPI, I2C, JTAG, SCIO, or other custom communication protocols while repeatedly thinking about the code, constructing waveforms in your mind over and over again, and racking your brains in experiments to guess the differences from the actual waveforms... To do a good job, one must first sharpen their tools. At this point, you need a simple logic analyzer that allows you to understand the fluctuations of each pulse at an extremely low cost?
We have launched and developed this highly cost-effective logic analyzer from the perspective of user practicality, adhering to the principle of "simplicity first". This logic analyzer is compatible with the most commonly used Saleae software interface and does not require any jumpers for mode selection.
The main body of this logic analyzer is only the size of two one yuan coins, the size of a matchbox, small and exquisite, portable, and essential for debugging:
Main parameters:
8-channel input, with channel identification corresponding to the excuse on the box label, clear at a glance. When using it, refer to the label on the box to indicate which wire to connect, which can effectively prevent the use of non professional connecting wires
One way logic pen indication: Use a small light to indicate the level of CH1, which is  and clear.
Input characteristics: The capacitance is 5PF and the impedance is 100K ohms. This is a reasonable impedance that we have balanced and only the mainstream parameter.
VIH (Input recognizable high level): A voltage higher than 1.6V is recognized as high level. It can be used to stably collect signals at 5V, 3.3V, 2.5V, and 2.0V levels. It can also work in a 1.8V level system, but it is not very recommended.
Real time data upload, upper computer adopts compressed storage, with a maximum collection depth of 10T, far exceeding actual requirements!
Perfect support for various triggering modes, including rising edge, falling edge, high-level trigger, low-level trigger, and a combination of the above four basic methods to form a complex trigger!
The sampling speed recording can be set to 24MHz 16MHz, 12MHz, 8MHz, 4MHz, 2MHz, 1MHz, 500KHz, 250KHz, 200KHz, 100KHz, 50KHz, 25KHz.