Trimaran generator controller HGM1780 /6010K/6020K/6110K/6120K

HGM1780 is a self starting module generator, composed of a panel button 3 working state, you can achieve manual start / stop generator can automatically start / stop generator through a remote starting signal, and in detecting faults (water temperature, low oil pressure cylinder / high temperature, emergency shutdown, overspeed alarm) automatically disconnect the fuel and shutdown solenoid pull power relay. The panel diagram LCD indicates the fault status and provides a true and effective fault alarm signal.

Performance and characteristics

1. With microprocessor as the core, large screen LCD icon, symbol display, touch button operation.
2. The power supply of wide range (835) VDC, 12V or 24V can adapt to the environment of starter batteries.
3. With power generation, speed, temperature, pressure, level sensor input port, digital display of power.
4. Generation voltage, battery voltage, speed, temperature, pressure, level sensor threshold can be set.
5. With idle speed control and power down function.
6. With 3 working conditions: manual, automatic, stop.
7. Through the software settings, the controller can be set to the engine controller (not select the generator voltage input). It is suitable for controlling the water pump unit and so on.
8. The panel is equipped with a red LED (LED) to display the work and alarm status.
9. A variety of temperature, pressure, level sensor can be used directly, and can customize the parameters; temperature and pressure sensor are respectively and temperature and pressure alarm in parallel to increase the level of protection in the role of providing digital time.
10. A variety of start-up conditions (speed sensors, oil pressure, power generation) are optional
11. 2 relays are fixed to the output (fuel output, start, output)
12. 1 programmable output ports, which can set public alarm output, stop failure output, preheat output or idle control output function
13. Through the LINK programming with PC software to test machine parameter settings (using the SG72 adapter of the company production), PC only one USB interface, parameters can be set up in the real machine, the battery can also be not connected, by the PC machine USB to the controller provides power supply parameter settings.
14. Modular structure design, flame retardant ABS plastic shell, embedded installation method, compact structure, small size, advanced SCM control, stable performance, easy operation

HGM6100K series power automation controller integrates digital, intelligent and network technology, for a single - generator automation and monitoring system, realize the generator of automatic start / stop, data measurement, alarm and protection function of "three remote". The controller adopts large screen liquid crystal (LCD) display, and the interface is selectable in both Chinese and English. The operation is simple and the operation is reliable.

HGM6100K series power automation controller using microprocessor technology, realizes precise measurement, constant adjustment and timing, threshold setting function parameters, all parameters can be adjusted from the front of the controller, or use the PC through programming interface, and can make use of PC through the RS485 interface adjustment and monitoring. The utility model has the advantages of compact structure, simple wiring and high reliability. The utility model can be widely applied to the automatic system of various generator sets.

Performance and characteristics

The HGM6100K series comes in four different sizes:
HGM6110K/6110KC: for single machine automation, through remote boot signal control, generator set automatically start and stop;
HGM6120K/6120KC: on the basis of HGM6110K/6110KC, the city electricity power monitoring and power generation / generation automatic switching control function (AMF) have been added, which is especially suitable for the single automation system consisting of one city and one machine.

• Its main features are as follows:

• 1. liquid crystal display LCD is 128X64, with backlight, two languages (Simplified Chinese and English) display, touch button operation;
• 2., with RS485 communication interface, the use of MODBUS protocol can achieve "three remote" function;
• 3., suitable for three-phase four wire, single-phase two-wire and two-phase three wire (120/240V) power 50/60Hz system;
• 4. collect and display three-phase voltage, three-phase current, frequency and power parameter of city power / power generation;
• 5., the city power has over-voltage, undervoltage, lack of phase function, power generation with overvoltage, undervoltage, over frequency, frequency, over-current function;
• 6. precise collection of engine parameters:
• 7., control and protection function: realize the - generator set automatic start / stop, shut off (ATS switching) and perfect fault display and protection function;
• 8., with power down, idle speed control, preheating control function, and all relay output;
• 9 parameter settings: allow the user to change the setting of its parameters, and memory in the internal FLASH memory, will not be lost when the system is powered down, the controller of all parameters can be set in the front panel, also can be programmed by the software PC port settings (SG72 adapter), also can use PC through the RS485 interface to adjust;
• More than 10. kinds of temperature, pressure, oil level sensor can be used directly, and can customize parameters;
• More than 11. kinds of start-up conditions (speed sensor, oil pressure, power generation) can be selected;
• 12 power supply range (VDC 835), can adapt to different starting battery voltage;
• 13. all parameters are adjusted digitally, and the simulation and adjustment method of conventional potentiometer is abandoned, which improves the reliability and stability of the whole machine;
• 14. modular structure design, pluggable terminals, embedded installation method, compact structure, easy installation.