brand | Trimaran |
---|---|
Model | HGM6110 |
Color classification | HGM6110 HGM6120 |
I. overview
HGM6110 power station automation controller integrates digital, intelligent and network technology, for a single - generator automation and monitoring system, realize the generator of automatic start / stop, data measurement, alarm and protection function of "three remote". The controller adopts large screen liquid crystal (LCD) display, and the interface is selectable in both Chinese and English. The operation is simple and the operation is reliable.
HGM6110 power station automation controller using microprocessor technology, realizes precise measurement, constant adjustment and timing, threshold setting function parameters, all parameters can be adjusted from the front of the controller, or use the PC through programming interface to adjust, and can use PC through RS485 interface adjustment and monitoring. The utility model has the advantages of compact structure, simple wiring and high reliability. The utility model can be widely applied to the automatic system of each type of generator set.
Two, performance and features
HGM6110: for single machine automation, through remote boot signal control, the generator starts and stops automatically;
Its main features are as follows:
O LCD LCD is 128X64, with backlight, two languages (Simplified Chinese and English) show
Light touch button operation;
With RS485 communication interface, MODBUS protocol can be used to achieve "three remote" function;
Suitable for three-phase, four wire, single-phase, two-wire, two-phase three wire (120/240V) power supply, 50/60Hz system.
Collect and display three-phase voltage, three-phase current, frequency and power parameter of power supply / power generation;
City power generation
Line voltage Uab, Ubc, Uca line voltage Uab, Ubc, Uca
Phase voltage Ua, Ub, UC phase voltage Ua, Ub, UC
Frequency F1 frequency F2
load
Current IA, IB, IC
Active power PWR
Reactive power PWR
Apparent power PS
Power factor PF
Cumulative power energy kWh
The power of the city has overvoltage, undervoltage and phase failure. The power generation has overvoltage, undervoltage, over frequency and under frequency,
Overcurrent function;
Precise collection of various parameters of the engine:
The temperature of WT DEG C / Fahrenheit display
Oil pressure OPkPa/Psi/Bar is displayed simultaneously
Fuel level FL units:%
Speed SPD units: RPM
Battery voltage VB unit: V
Charge electromechanical pressure VD unit: V
The timer HC can be accumulated for 999999 hours
The cumulative startup times can be accumulated 999999 times
Control and protection function: realize the automatic switch on / off of - generator set, shut down switch (ATS switch) and perfect fault display and protection function;
The utility model has the functions of power down, idle speed control and preheating control, and all relay outputs.
The parameter setting function: allow the user to change the setting of its parameters, and memory in the internal FLASH memory, will not be lost when the system is powered down, the controller of all parameters can be set in the front panel, also can be programmed by the software PC port settings (SG72 adapter);
A variety of temperature, pressure, oil level sensors can be used directly, and can be customized parameters;
A variety of start-up conditions (speed sensors, oil pressure, power generation) are optional;
The power supply range is wide (8-35) VDC, and it can adapt to different starting battery voltage environment;
All parameters are adjusted digitally, and the - adjustment method of conventional potentiometer is abandoned
Higher reliability and stability of the whole machine;
Modular structure design, pluggable terminals, embedded installation method, compact structure,
Easy installation.