72 standard circuits for selection.
Rich variety, strong tolerance to oil type cam switch.
The operating range can be up to 12 locations.
The switch is made of double contact blocks.
Contact block rating is 600V, 10A.
The most suitable for the current meter, voltage meter.
Certified by UL and CSA.
contact rating
Rated insulation voltage 600V
Rated current 10A
Contact capacity 60947-5-1 IEC for the type of use
AC-15 (A600)
DC-13 (P600)
Contact arrangement
Double break slow moving contact
There are two contacts on each floor.
Up to 6 layers can be installed (spring reset: up to 3 layers)
Operation mode alternate type spring reset type
Angle 30 degrees, 45 degrees, 60 degrees, 90 degrees 45 degrees
Operation knob position 2 ~ 12 position 2, 3, 4 position
Insulation resistance above 100 M (DC 500V MB)
Voltage withstand and non charged parts: AC 2500V, 1 minutes
Mechanical service life
1 to 3 layers: 500000 times
4 to 6 layers: 200000 times
Electrical life of more than 200000 times
Ambient temperature: to which C (no ice)
Protection level
ACSNO, ACSSO:IP65
ACSNK, ACSSK:IP54
UCS:IP40
Weight (about) 319g (ACSNO-663-S2B)
Characteristic
Contact capacity of the type used
Using voltage 110V 220V 440V 24V
Current use
AC
Hz 50/60
AC-12 and 10A semiconductor resistive load 6A 2A
AC-15 electromagnetic load control (> 72VA) - 3A 1A 5A
DC
DC-12 and 8A 3A semiconductor resistive load 1A 0.4A
DC-13 electromagnetic control 1.2A 0.45A 0.2A 5A
Note: the classification of closed current and open circuit current using a current of 60947-5-1 IEC.
USD
EUR
GBP
CAD
AUD
CHF
HKD
JPY
RUB
BRL
CLP
NOK
DKK
SEK
KRW
ILS
MXN
