[BELLA]YGC-FX wind sensor / Anemometer(The current signal 0-20MA)

Introduction

YGC-FXWind sensors are used to measure the level of wind wind - meteorological instruments .ItsInternal use of precisionAngle sensorsAnd selection of low inertia light metal wind vane response , when the wind resistance signal output changes by rotating the shaft driven tail potentiometer shaft to rotate , resulting in changes in the activity of the end of the potentiometer .

The product has a large measuring range , good linearity,High precision, no dead spots ,Lightning resistance , easy observation , stable and reliable, and can be widely used for meteorological, oceanographic , environmental , airports, ports , laboratories, industry and agriculture , and transportation and other fields.

Physical map

Product Features

ComplyWMOWorld Meteorological Organization specification (CIMO Guide)

High sensitivity : Starting wind speed0.3m / s

0-360Degree display , no dead ends .

For a variety of harsh environments,Wind strength .

Technical indicators

Structure size chart:

Installation Instructions

1 ,Ensure that the mounting bracket parallel to the ground ;

2 ,As shown,UseSupportingScrew nut , through sensorsMounting holes. The sensor is fixed to the mounting bracket ;

3 ,There is a wind sensor housingTriangleFixedSouthSigns, safetyWhen installedPleaseIts alignmentSouthFang( Determined by the distribution of the compassBit );

4 ,By reservedM23Route Kong , the Hang plug connector and sensorThe Air jack is connected ;

5 ,Please avoid demolition installation process sensor .

Precautions

1Please check the packaging is intact, and check product model is consistent with the selection ;

2Do not live wiring, check the wiring is complete and correct before electricity ;

3,Long sensor product line will affect the output signal ,Have been welded components or wires Do not tamper with the factory when using, Subject to change , please contact the manufacturer;

4The sensor is a precision device users to use Do not disassemble, corrosive liquid with a sharp object or contact with the sensor surface , in order to avoid damage to the product ;

5Please keep test certificate and certificate , along with product returns maintenance .

Troubleshooting

1,Vane rotary ineffective , hysteresis great. Long-term use may result in the bearing of a foreign body or oil runs out. Please return the company oiling sensor ;

2,When the - output indicator represents the value0Or is not within range . May be due to wiring problems caused logger can not obtain information correctly. Please check the wiring is correct, firmly ;

3,If it is above reasons, please contact the manufacturer .