| Output | - Sensor |
|---|
| Type | Gas Sensor |
|---|
| Material | Polymer |
|---|
| Model Number | gas sensor |
|---|
| Theory | Capacitance Sensor |
|---|
| is_customized | Yes |
|---|
MQ131 semiconductor ozone sensor ( high concentration )
MQ131Sensitive material gas sensor is used in clean air low conductivity tin dioxide(SnO2). When there is an ozone gas sensor is exposed , the conductivity of the sensor increases with the concentration of ozone gas in air is increased . Using a simple circuit to convert the change in conductivity of the gas concentration corresponding to the output signal.
MQ131Ozone gas sensor sensitivity is high, chlorine , nitrogen dioxide and other strong oxidizing gases also have some sensitivity to the reaction of organic interfering gases and ozone in the opposite direction .
- shape structure
Feature
*In a wide range of concentrations of ozone gas have good sensitivity
*OzoneOfHigh sensitivity
*Long- life, low cost
*Simple drive circuit can be
Application
*Family with ozone concentrations exceeding the alarm
*Industrial ozone concentrations exceeding the alarm
*Portable ozone concentration detector
Model | MQ131 |
Product Type | Semiconductor gas sensor |
Standard package | Bakelite ( black bakelite ) |
Detection of gas | Ozone |
Detectable concentration | 10-1000ppmOzone |
Standard circuit conditions | Circuit voltage | Vc | 24VDC |
Heating voltage | VH | 5.0V 0.2V ACorDC |
Load Resistance | RL | Adjustable |
Under standard test conditions sensing Characteristics | Heating resistor | RH | 31 3 ( at room temperature ) |
Heating consumption | PH | 900mW |
Sensing Resistance | Rs | 50K-500K(in 50ppm O3) |
Sensitivity | S | Rs (in air) / Rs (in50ppmO3)3 |
Concentration gradient | | 0.6(R50ppm/ R10ppmO3) |
Standard Test Conditions | Temperature, humidity | 202;65% 5% RH |
Standard Test Circuit | Vc: 5.0V 0.1V; VH: 5.0V 0.1V |
Warm-up time | Less than48Hour |



