We use cookies to improve your online experience. By continuing browsing this website, we assume you agree our use of cookies.
Your position: Home / Industrial Accessories / Engine Generator Parts

- generator set, controller, DSE705 controller, DSE704 control module, control panel

- generator set, controller, DSE705 controller, DSE704 control module, control panel
Quantity:
-
+
(99 available)
Shipping Cost:
to
Estimated Delivery Time:
Please select the country you want to ship from
Please select the information you wantX
  • Description
  • Reviews(70)
Color classification DSE705 DSE704


 

The deep sea DSE705 control module is an automatic transfer switch controller that monitors incoming AC power (public power) supplies. If an electrical (utility) failure occurs, the DSE705 will instruct the generator to operate and load. Use advanced surface mount construction techniques to provide a tight, yet highly modular module. The operation is via three buttons mounted on the front panel, including manual, no-load, manual, and automatic stalls." The automatic mode selection is confirmed by the LED indication, which monitors access to the mains (public power) supply (3 phase or single phase). If entering the AC power (power) is lower than a preset value falls (to 180V), the generator will be required to start and transfer the load to the generator. When the AC power (utility) supply is returned to the limit, the module will wait for a set settling period and then transfer the load back to the mains. The engine will be required to stop after a cooling period. The microprocessor of the module provides a list of readable timers and functions, which are adjusted by a small, adjustable switch behind the module. Once you set the mode, use the button on the front panel to adjust the parameter settings. This module monitors the engine and provides the following functions: City Power (utility) failure detection, and set failure and recovery timers. Warm-up and cooling timer. Adjustable voltage of utility (utility). Transfer contactor control, continuous LED simulation. The generator may indicate (from the generator frequency) that the engine runs the signal. Publications, such as environmental regulations and engineering standards of EMC, are carefully added to the design. Advanced features such as solid-state output protected, means that there is no moving parts or contact can be resolved.


Characteristic;

According to the design of city power failure since the start of the microprocessor detection control contactor or transfer facility via the front panel setting simple button control operation can be set to start transmission timer solid-state remote start input LED - display lamp power failure / recovery delay timer / timer warm-up cooling single / three-phase electric induction load load shedding (input output solid state contactor "close to the midline")

Specifications.

DC power supply: 8 to 35 V continuous.

Starting separation: 0 V 50 ms can be saved, but the power supply is 10V and power supply reverts to 5V before disengaging.

This is done without the need for an internal battery.

Current: running 50mA standby 10mA

Electric ball input range: 75 (midline) to 277 (midline), 3 phase, 4 line AC (+ 20%)

Electric ball input frequency: 50-60 Hz at rated engine speed (small: 75V AC centerline) (generator can be used for 45Hz)

Starting requirement output: 1.2A DC to supply voltage.

Auxiliary output: 1.2A DC to supply voltage.

Size: 165 X, 125 X, 29 mm. (6.5, x4.9, x1.2)

Operating temperature range: -30 to + 70 degrees


 

Average rating: 5.0 based on 70 reviews
Share your thoughts with other customers
Write a review
Product reviews can be carried out after the member login, please click here to login
Links:medicalproduct非常的好用
Message Us